5V power supply cabinet - 恒翼能HYNN-动力电池智造设备专业供应商

5V power supply cabinet

HYNN power battery testing system is mainly designed for power battery. Designed with high accuracy, high flexibility and high performance, it can meet all test requirements for battery with the range of 0-5V (Voltage), 20mA-30A-400A (Current).

Model：ECT0530A, ECT0560A, ECT05100A, ECT05200A, ECT05400A

详情信息

Test items

1. Battery cycle life test.

2. Battery capacity test.

3. DCIR test.

4. Battery charge/discharge characteristics test.

5. Battery charge retention ability test.

6. Battery charge/discharge efficiency test.

7. Battery depth/constant-voltage discharge test.

8. Battery overcharge/over discharge capacity test.

9. Battery dynamic test.

10. Battery ramp discharge/pulse discharge test.

System characteristics

1. Save energy effectively by feeding discharging energy back to power system, with small energy heat produced.

2. Reliable, ultra-high precision testing with 0.05% accuracy and 5ms/time for sampling rate.

3. Independent channels with configurable parameter and condition setting for each individual channel.

4. With complete protection function system for input and output, hardware and software, reverse connection, reconnection when power on and etc.

5. No impact current when starting the channel. The CC-CV transition is perfectly done without voltage and current surge.

6. One computer controls for centralized management.

7. The DCIR test process can be set automatically as per default setting.

8. Modular design, and box design is convenient for maintenance.

9. Comprehensive data covering all aspects, and data uploads to MES system in real time.

Functional characteristics

1. The hardware part of the device is a modular design with one or more modules for each independent channel.

2. The DC-DC conversion method is adopted for the device, which is different from the traditional linear power supply method. It generates less heat during test, which not only avoids the safety and stability problems of high-temperature but also saves power consumption.

3. The imported alloy material is used as current sampling device to ensure the small drift in full load output, which can effectively guarantee the stability of large current test and the reliability of full-scale and long-term operation accuracy.

4. The soft-start mode is adopted for the device current output, which avoids instantaneous output of large current surges to generate thermal shock on battery.

5. Device hardware control circuit uses current and voltage dual-loop control. The switching from constant current to constant-voltage is smooth without spike.

6. The device has a DC resistance test function, which can be used to detect battery consistency and battery with potential safety hazards.

Device parameters

S/N	Model		DECT0530A	DECT0560A	DECT05100A	DECT05200A	DECT05400A
1	Quantity of main channels		96CH/Cabinet	16CH/Cabinet	8CH/Cabinet	4CH/Cabinet	2CH/Cabinet
2	Channel operation mode		Overall control/independent control
3	Main channel cut-off conditions		Time, total voltage, total current, capacity, temperature, etc.
4	Voltage	Channel measurement range	0~5V
		Minimum discharge voltage	1.5V
		Accuracy	± (0.03%RD+0.03%FS)
		Resolution	0.1mV
	Current	Channel measurement range	±30A	±60A	±100A	±200A	±400A
		Minimum output current	20mA
		Accuracy	± (0.03%RD+0.03%FS)
		Resolution	0.1mA
	Time	Resolution	1s
	Power	Output power	Single-channel consistent operating power as per below
			150W	300W	500W	1,000W	2,000W
		Stability	±0.1%FS
5	Communication method		RJ-45
6	Time interval		Minimum 20ms
7	Voltage trigger		Voltage ≥1mV
8	Current trigger		Current ≥1mA
9	Dimension		600 (Width) * 600 (Depth) * 1,800 (Height) mm
10	Power distribution requirements		380V/220V/50Hz Power: 18KW

热门推荐更多

Negative pressure formation needle bed

HYNN negative pressure formation needle bed applies with six-sided protection scheme.Each storage position layer is isolated with stainless steel plate and fire proof rock wool; Needle bed is equipped with water fire protection and gas fire protection; Storage position is designed with smoke and temperature sensors. Safe and reliable, it is the most popular and advanced design scheme for ternary cells and lithium ferrum battery testing nowadays.

OCV test equipment for cylindrical battery

HYNN OCV tester can automatically test for the open circuit voltage, AC internal resistance and shell cover insulation (the voltage between the positive electrode and shell) of the single cell in the battery tray. OCV testing is the essential process of battery manufacturing. Combining battery testing with battery tray for batch testing or single testing, it can reach to fast and reliable testing results. The production management and control system automatically calculates the K value according to the test data, and automatically completes the binding of the production data information, automatic saving and binding information. Data can be export through internet connection.

Cylindrical battery classification machine

HYNN battery level grading machine automatically scans barcode for the incoming battery, selecting and grading finished batteries according to some set rules. The user can set rules and numbers of levels for grading. Programming is proceed via data of battery manufacturing process. The formation management control system can automatically grade and upload grading results data according to data from former process. The grading machine can perfectly connect with the automatic logistics equipment and process equipment.

Automated logistics line

Automatic warehouse logistics system has become an essential part of the logistics industry, along with the development of modern technology and production scale. The born of automatic warehouse logistics system has changed the development model of traditional logistics warehouse in work load and efficiency. So far, the system is widely used in the automatic production industry of lithium battery.

Automated warehousing